ISCA Archive ICSLP 1994
ISCA Archive ICSLP 1994

Measument of palatolingual contact pressure during consonant productions using strain gauge transducer mounted platal plate

Masafumi Matsumura, Kazuo Kimura, Katsumi Yoshino, Takashi Tachimura, Takeshi Wada

This paper deals with the measurement of palatolingual contact stress and pattern during consonant productions using a force sensor mounted palatal plate. The force sensor is composed of a strain gauge and a fixed beam that are mounted together in a palatal plate that is attached to the hard palate. The palatolingual contact stress is concentrated in a spot on the fixed beam by a protuberance bonded on the fixed beam. When the tongue touches the protuberance of the force sensor, the palatolingual contact stress on the force sensor is detected from the strain produced in the fixed beam. By mounting multiple force sensors, the palatolingual contact stress and pattern can be obtained. We have developed a prototype system, which consists of a five-force-sensor mounted palatal plate, a multi-channel amplifier for a strain gauge and a computer. The force sensor mounted palatal plate is LMM in thickness. The five-force-sensors are placed approximately at a 6mm interval along the midsagittal line of the hard palate. The most anterior sensor is located 5mm posterior to the alveolar ridge. Output of the force sensor was proportional to the stress applied to the fixed beam and had no hysteresis. Measurement error of the force sensor was less than 2% and an error by mechanical interferences among the sensors was less than 5.4%. The palatolingual contact stress and pattern for an adult male were measured during the productions of consonants /t/,/d/,/n/. Using the proposed system, dynamic aspect of the palatolingual contact stress in time-domain and space-domain were readily observed.


Cite as: Matsumura, M., Kimura, K., Yoshino, K., Tachimura, T., Wada, T. (1994) Measument of palatolingual contact pressure during consonant productions using strain gauge transducer mounted platal plate. Proc. 3rd International Conference on Spoken Language Processing (ICSLP 1994), 655-658

@inproceedings{matsumura94b_icslp,
  author={Masafumi Matsumura and Kazuo Kimura and Katsumi Yoshino and Takashi Tachimura and Takeshi Wada},
  title={{Measument of palatolingual contact pressure during consonant productions using strain gauge transducer mounted platal plate}},
  year=1994,
  booktitle={Proc. 3rd International Conference on Spoken Language Processing (ICSLP 1994)},
  pages={655--658}
}